Amendment status not verified — confirm the current text below against the official source.
Essentials of a bonded manufactory .-(1) A bonded manufactory shall make provision for the following: (1) one plain spirit store unless the manufactory is attached to a distillery or a rectified spirit warehouse from which rectified spirit is made available as and when necessary: (it) at least one large room for manufacturing medicinal prepara- tions: (iu) one or more rooms for storing finished medicinal prepara- t I ons: RULL 26 24 RULII26 INDLNTFORRECTIFIEDSPIRIT 2.5 th (iv) separate arrangement for manufacture of toilet preparations: he (v) the storage of finished toilet preparations; Ae (vi) accommodation with necessary furnitur e near the bonded to premises for the officer-in-charge: (vii) malleable iron rods not less than 19 nlm. in thickness. set not more than 102 inns. apart., embodied in brick work up to a depth of at least 51 nom. and covered on the inside with strong wire netting or expanded metal of a mesh not exceeding 25 nun. in diameter of length in every window of the bonded premises: (viii) a board on which the name of the room and a serial number. if any, are legibly painted in oil colour on the outside of every such room in the manufactory; (ix) all pipes from sinks or wash-basins inside manufactory premises discharging into drains forming part of the general re drainage system of the premises: C_ (x) all gas and electric connections with the licensed premises so In fixed as to admit of the supply of gas or electricity being cut off and all the regulators or switches being securely locked at on the end of the day's work. to (2) The Central Government may in special cases relax any of the provisions of Cls. (i) to (x) of sub-mile (1). it 24. No additions or alterations to be made without orders.-No addition of or alteration shall b° made in the bonded premises or in respect of the nl permanent fixtures therein without the previous orders of the Excise 1Y Commissioner. Plans, in triplicate showing each addition or alteration shall be submitted with the application for the necessary permission and copies disposed of in the same manner as copies of the original plans of the bonded manufactory as provided in rule 95. Comment Prior permission of the Excise Commissioner is a must for making alterations or additions in the bonded premises.